Showing 41–60 of 253 results

ROTORRAZER SAW WITH CASE

$69.00

From the Manufacturer Use it in a router table or hold it by hand. Router RaiZer mounts to any router table and combined with your speed wrench makes height adjustments quickly and easily from above the table. Or, make handheld adjustments with the knurled adjustment knob that also works with the speed wrench. Plus, the quick adjust feature allows you to instantly set your router to the approximate depth and then micro-adjust. Fits the following routers: Craftsman 27505, 27506, 27510, 27511, DeWALT DW625, DW621, Elu 3337, 3338, 3339, Freud FT2000, Hitachi TR12, M12V, Makita 3612 series, Porter-Cable 693, 7538, 7539, and Ryobi RE600.Router Raizer Rz100 Precise Router Depth Adjustment

APPION RECOVERY UNIT

$399.00
  • Compact and lightweight: Weighs only 24 lbs
  • Twin Cylinders and Twin Condensers for ultra fast recovery
  • Refrigerant-Isolated Crankcase, eliminating bearing contamination
  • Pumps R410A liquid and vapor
  • 7-inch 10-blade turbine fan @ 3000 rpm blasts 600 cfm of cooling air over the twin heads and condensers
  • Operates up to 50°F cooler for maximum reliability and speed even in high ambient conditions
  • Recovery Rates of 0.62 lbs./minute vapor and 10.36 lbs./minute of liquid (ARI 740-98 Ratings R22)
  • High Recovery Rates
  • Maximum Airflow
  • Twin Cylinder for Rapid Recovery
  • Twin Condenser for Maximum Cooling
  • Handles Most All Refrigerant including R410a
  • 550psi Shut Off Switch
  • Rugged Case with Soft Gripping Handle

DEWALT 20V DRILL W/ BATTERY

$129.00
  • Lightweight 2.4 lbs. and Compact 6.3 in. Front to Back Design
  • 1/2 in. Ratcheting Chuck & Variable Speed Trigger
Sale!

RYOBI RECIPROCAL SAW NO BATTERY OR CHARGER

$45.00
  • QUICK BLADE CHANGES: No tools necessary to change blades! Simply unlatch the front and the blades will pull out easily. This tool is compatible with any T-Shaped blade, which will slide and lock right into the system
  • VARIABLE SPEED TRIGGER lets you change your power from job-to-job. Increase pressure on the trigger to increase the cutting speed and power of the saw
  • ANTI-VIBRATION HANDLE: Work in comfort. Springs and rubber plates found inside the system make the rattling found with reciprocating applications easier on your joints, letting you work longer and more accurately
  • RUBBER OVERMOLD lets you keep a grip on this power tool, even in slippery conditions

DEWALT HAMMER DRILL

$109.00
  • DEWALT-built high power, high efficiency brushless motor of DEWALT 20V hammer drill delivers up to 75% more runtime vs. 18V NiCad brushed motors
  • The cordless hammer drill features heavy-duty 1/2-inch ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
  • 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model
  • LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces

14KT YELLOW GOLD RING

$179.00

14KT YELLOW GOLD RING WITH 2 SMALL ROUND CLEAR DIAMONDS AND 1 OVAL PINK STONE. SIZE 6

14KT YELLOW GOLD RING SET

$399.00

14KT YELLOW GOLD RING SET WITH 16 SMALL, 2 TRIANGLE AND 1 RECTANGLE  DIAMONDS. SIZE 7.25

RYOBI 18V CIRCULAR SAW W/BATTERY

$49.00
  • GRIPZONE OVERMOLD: The handles of this power tool are lined with a rubber mold. This increases friction between your hands and the tool, improving handling in most conditions
  • TRANSPARENT LOWER GUARD: The polyurethane blade guard is clear, so you can get maximum visibility on your work while you make your cuts
  • ADJUSTABLE BEVEL: You can adjust the foot of this cordless circular saw up to 50 degrees to cut at a variety of angles for different applications
  • EXTRA SIDE HANDLE gives you improved control. Its location on the left side of the tool gives you greater visibility over your cuts while you work

AMPEG BASS SPEAKER CABINET

$499.00
  • 15″ custom US-made Eminence LF driver
  • 575 watts RMS power handling @ 8 ohms
  • 1″ Eminence APT:50 HF driver w/L-Pad level control
  • Frequency response: 28Hz – 10kHz
  • Max SPL: 128dB
  • Sensitivity: 98dB
  • Weight: 59 lbs
Sale!

PRESONUS TUBE PRE AMP

$69.00
  • 12AX7 tube-based preamp with XMAX solid-state input stage
  • Gain control and Tube Drive saturation control
  • Low-noise dual-servo (no capacitors) gain stage
  • Separate instrument and mic inputs
  • Phantom power, HP filter, -20 dB pad, and polarity-reverse
  • Compact 1/3U rack-mount chassis

RYOBI CIRCULAR SAW 18V

$59.00
  • EASY GRIP: Rubber overmold makes it easy for you to grip and control this tool, even in slippery conditions
  • LASER GUIDE: The tool generates a red line on the work surface in front of the saw upon the tool’s activation, letting you see where you’re working
  • ADJUSTMENT: Easy-access knobs let you adjust your depth up to 1 9/16 inches and your beveling angle from 0 to 50 degrees
  • ONE+ COMPATIBLE: This tool is compatible with many Ryobi battery, including the P100, P101, P102, P103, P104, P105, P107, and P108
Sale!

ACTERNA SERVICES TESTER

$199.00
  • Best-in-class for test accuracy — it really does matter
  • Multiple chipsets supported for xDSL — widest interoperability on the market
  • Find real problems up to 30% faster — correlates copper, xDSL and IPTV measurements
  • Protects your investment — modular approach to add GigE, Ethernet, E1, etc.
  • Helps you define an accurate, repeatable test strategy — with automated tests, expert modes — reduces errors and minimizes repeats.

ROCKWELL OSCILLATING TOOL

$79.00
  •  Duo tech oscillation technology allows you to select the optimum oscillating angle (3.4° or 5°) for the best performance on various materials and applications
  •  4.2-amp motor with constant speed control prevents stalling under a heavy load
  •  Variable speed (11,000 to 20,000-OPM) offers maximum control across a variety of applications
  •  Hyperlock tool-free blade holding system provides 1 ton of holding force for quick blade changes
  •  10-ft cord minimizes the need for extension cords
  •  Integrated work light ensures better accuracy when working in dimly light spaces
  •  Universal fit system allows you to use other brands’ accessories for your convenience

RYOBI MULTI TOOL NO BATTERY

$39.00
  • Part of the Ryobi 18-Volt ONE+ system
  • Multiple-position toolhead adds handling versatility
  • LED light brightens work area
  • Ergonomic GripZone overmold for maximum comfort

SONY CYBERSHOT CAMERA

$39.00
  • Capture your videos in HD Movie mode (720p)
  • Capture breathtaking images in Sweep Panorama Mode
  • 16.1 megapixel 2.7-inch LCD screen for easy viewing
  • Optical SteadyShot image stabilization reduces blur
  • iAuto mode automatically optimizes camera settings